• show diag slot—Displays the IDPROM information for the assemblies in the chassis.
Checking Hardware and Software Compatibility
To check the minimum software requirements of Cisco IOS-XE software with the hardware installed on your
Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router, Cisco maintains the Software
Research tool on Cisco.com. The tool provides the minimum Cisco IOS-XE requirements for individual
hardware modules and components.
To access this tool, you must have a Cisco.com login account.Note
To access the Software Research tool:
1
Go to http://software.cisco.com/selection/research.html.
2
In the Search by Product tab, type Cisco ASR 920 Router .
3
The Cisco Suggested Release(s) are displayed.
Configuring the Router at Startup
This section explains how to create a basic running configuration for your Cisco ASR 920-24SZ-IM,
ASR-920-24SZ-M, ASR-920-24TZ-M Router.
You must acquire the correct network addresses from your system administrator or consult your network
plan to determine the correct addresses before you can complete the router configuration.
Note
Before continuing the configuration process, check the current state of the router by entering the show version
command. This command displays the release of Cisco IOS software that is available on the router.
For information on modifying the configuration after you create it, see the Cisco IOS configuration and Cisco
IOS Master Command List, All Releases guides.
To configure a Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router from the console,
you must connect a terminal or terminal server to the console port on the Cisco ASR 920-24SZ-IM,
ASR-920-24SZ-M, ASR-920-24TZ-M Router. To configure the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M,
ASR-920-24TZ-M Router using the management Ethernet port, you must have the router’s IP address.
Accessing the CLI Using the Console
To access the command line interface using the console, follow these steps:
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation
Guide
122
Initial Configuration
Checking Hardware and Software Compatibility
To Next Page
Loading...
Need help?
General
