Cisco ASR-920-24TZ-M User Manual

CHAPTER 3
Installing the Router
This chapter describes how to install the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M
Router.
•
Prerequisites, page 49
•
Installing the Router in a Rack, page 50
•
Wall Mounting the Routers, page 61
•
Installing and Removing the Interface Module, page 66
•
Installing and Removing the Fan Tray, page 70
•
Installing the Power Supply, page 76
•
Installing and Removing SFP Modules, page 90
•
Connecting to the 10/100/1000 Ports, page 96
•
Installing the Chassis Ground Connection, page 98
•
Connecting a Router to the Network, page 103
Prerequisites
Before installing the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router, it is important
to prepare for the installation by:
•
Preparing the site (site planning) and reviewing the installation plans or method of procedures (MOP).
See Site Planning section.
•
Unpacking and inspecting the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router.
See Receiving the Router section.
•
Gathering the tools and test equipment required to properly install the Cisco ASR 920-24SZ-IM,
ASR-920-24SZ-M, ASR-920-24TZ-M Router. See Tools and Equipment section.
For more instructions on how to prepare for the installation of the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M,
ASR-920-24TZ-M Router, see Chapter 2, Preparing for Installation.
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation
Guide
49

Cisco ASR-920-24TZ-M Specifications

General

Brand	Cisco
Model	ASR-920-24TZ-M
Category	Network Router
Language	English