Cisco C1000-16P-E-2G-L User Manual

Figure 20: Switch Removal
Installing the Power Cord Retainer (Optional)
This section applies to switches with an AC power connector.
Note
The power cord retainer (PWR-CLP=) is optional. You can order it when you order your switch.
Procedure
Step 1 Choose the sleeve size of the power cord retainer based on the thickness of the cord. The smaller sleeve can
be snapped off and used for thin cords.
Cisco Catalyst 1000 Series 8-Port and 16-Port Switch Hardware Installation Guide
29
Switch Installation
Installing the Power Cord Retainer (Optional)

Cisco C1000-16P-E-2G-L Specifications

General

Brand	Cisco
Model	C1000-16P-E-2G-L
Category	Switch
Language	English