Cisco Catalyst 2960-XR Reference

session
To access a specific stack member use the session command in privileged EXEC mode on the stack master.
session stack-member-number
Syntax Description
Stack member number to access from the stack master. The range is 1 to 8.
stack-member-number
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS 15.0(2)EX1
Usage Guidelines
When you access the member, its member number is appended to the system prompt.
Use the session command from the master to access a member switch.
Use the session command with processor 1 from the master or a standalone switch to access the internal
controller. A standalone switch is always member 1.
Examples
This example shows how to access stack member 3:
Switch# session 3
Switch-3#
Related Commands
DescriptionCommand
Reloads the stack member and applies a configuration change.
reload
Displays information related to the stack member or the switch stack.
show switch
Disables or enables the specified stack port on the member.
switch
Changes the stack member number.
switch renumber
Catalyst 2960-XR Switch Stack Manager Command Reference, Cisco IOS Release 15.0(2)EX1
OL-29435-01 21
Stack Manager Commands
session

Cisco Catalyst 2960-XR Specifications

General

Brand	Cisco
Model	Catalyst 2960-XR
Category	Switch
Language	English