Cisco Catalyst 2960-XR Reference

show switch
To display information that is related to the stack member or the switch stack, use the show switch command
in EXEC mode.
show switch [stack-member-number| detail| neighbors| stack-ports| stack-ring speed]
Syntax Description
(Optional) Number of the stack member. The range is 1 to 8.
stack-member-number
(Optional) Displays detailed information about the stack ring.detail
(Optional) Displays the neighbors of the entire switch stack.neighbors
(Optional) Displays port information for the entire switch stack.stack-ports
(Optional) Displays information about the stack ring.stack-ring
Displays the stack ring speed.speed
Command Default
None
Command Modes
User EXEC
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS 15.0(2)EX1
Usage Guidelines
This command displays these states:
• Waiting—A switch is booting up and waiting for communication from other switches in the stack. The
switch has not determined whether or not it is a stack master.
Stack members not participating in a stack master election remain in the waiting state until the stack
master is elected and ready.
• Initializing—A switch has determined whether it has stack master status. If it is not the stack master, it
is receiving its system- and interface-level configuration from the stack master and loading it.
• Ready—The member has completed loading the system- and interface-level configurations and can
forward traffic.
Catalyst 2960-XR Switch Stack Manager Command Reference, Cisco IOS Release 15.0(2)EX1
OL-29435-01 29
Stack Manager Commands
show switch

Cisco Catalyst 2960-XR Specifications

General

Brand	Cisco
Model	Catalyst 2960-XR
Category	Switch
Language	English