show platform stack compatibility table
To display feature compatibility tables for the switch stack, use the show platform stack compatibility table
command in privileged EXEC mode.
show platform stack compatibility table {all| independent| interdependent| port}
Syntax Description
Displays all feature compatibility tables.all
Displays a switch-level independent feature compatibility table.independent
Displays a system-level interdependent feature compatibility table.interdependent
Displays a port-level independent feature compatibility table.port
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS 15.0(2)EX1
Usage Guidelines
The show platform stack compatibility commands display feature incompatibility information between
stack members in a mixed stack. Compatibility checks ensure that features that are supported across members
of a stack using a forwarding ASIC with different capabilities will function effortlessly and error free.
Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks you
to do so.
Examples
This example shows how to display all feature compatibility tables:
Switch# show platform stack compatibility feature all
System Level Interdependent Feature Matrix
==============================================================
1: FHRR hardware vlan entry sharing feature
Supported by switch versions: 1 3 4
2: Jumbo MTU Routing Support
Supported by switch versions: 1 3 4
3: VRF on PVLAN interface
Supported by switch versions: 1 3 4
4: Global VRF config with greater than MAX policies
Supported by switch versions: 1 3 4
5: Routing keyword in IPv6 ACL
Catalyst 2960-XR Switch Stack Manager Command Reference, Cisco IOS Release 15.0(2)EX1
OL-29435-01 25
Stack Manager Commands
show platform stack compatibility table