Cisco Catalyst IR1821 Installation Guide

DescriptionItem
Pluggable Interface Module 0/4/0 (PIM)2
Pluggable Interface Module 0/5/0 (PIM)3
Pluggable Modules
The following subsections provide details on the different modules that can be plugged into the IR1800 Series
Routers.
Pluggable Interface Module (PIM)
The Pluggable Interface Module (PIM) is a pluggable unit used to connect to a wireless (LTE) interface. For
more information about the PIM, see Pluggable Interface Modules, on page 45.
SSD Module
The IR1800 supports one Solid State Drive (SSD) module. For more information see SSD Module, on page 51.
GNSS Module
The IR1800 supports one GNSS module. This module is used in addition to the ones integrated in the pluggable
LTE module for more accurate dead reckoning performance.
For more information about the module see GNSS Field Replaceable Unit Module, on page 55 .
SFP Modules
Class 1 laser product. Statement 1008
Warning
The IR1800 Ethernet SFP module provides connections to other devices. These field-replaceable transceiver
modules provide uplink interfaces. Local connectors provide the fiber-optic connection. RJ-45 connectors
allow copper connections. You can use any combination of the supported SFP modules listed in the following
table.
Table 3: Supported Gigabit Ethernet SFPs
Digital Optical MonitoringIndustrial
-40C to
+85C
Extended
-5C to
+85C
Commercial
0C to +70C
FiberDistanceGigabit Ethernet
SFP
—YES——MMF220-550 mGLC-SX-MM-RGD
—YES——MMF/SMF550m/10kmGLC-LX-SM-RGD
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
17
Product Overview
Pluggable Modules

Cisco Catalyst IR1821 Specifications

General

Brand	Cisco
Model	Catalyst IR1821
Category	Network Router
Language	English