Cisco Firepower 1120 Getting Started

Inside, Outside Network Connections
The graphic indicates which port is connected to the outside (or upstream) and inside networks, under the
following conditions.
• Inside Network—The port for the inside network is shown for the interface named “inside” only. If there
are additional inside networks, they are not shown. If you do not name any interface “inside,” no port is
marked as the inside port.
• Outside Network—The port for the outside network is shown for the interface named “outside” only.
As with the inside network, this name is required, or no port is marked as the outside port.
Management Setting Status
The graphic shows whether the gateway, DNS servers, NTP servers, and Smart Licensing are configured for
the management address, and whether those settings are functioning correctly.
Green indicates that the feature is configured and functioning correctly, gray indicates that it is not configured
or not functioning correctly. For example, the DNS box is gray if the servers cannot be reached. Mouse over
the elements to see more information.
If you find problems, correct them as follows:
• Management port and gateway—Select System Settings > Management Interface.
• DNS servers—Select System Settings > DNS Server.
• NTP servers—Select System Settings > NTP. Also see Troubleshooting NTP.
• Smart License—Click the View Configuration link in the Smart License group.
Viewing System Task Status
System tasks include actions that occur without your direct involvement, such as retrieving and applying
various database updates. You can view a list of these tasks and their status to verify that these system tasks
are completing successfully.
The task list shows consolidated status for system tasks and deployment jobs. The audit log contains more
detailed information, and is available under Device > Device Administration > Audit Log. For example,
the audit log shows separate events for task start and task end, whereas the task list merges those events into
a single entry. In addition, the audit log entry for a deployment includes detailed information about the deployed
changes.
Procedure
Step 1 Click the Task List button in the main menu.
The task list opens, displaying the status and details of system tasks.
Step 2 Evaluate the task status.
Getting Started
39
Getting Started
Viewing System Task Status

Cisco Firepower 1120 Specifications

General

Processor cores	12
Processor family	Intel
Built-in processor	Yes
Firewall throughput	1500 Mbit/s
Wi-Fi	No
IPSec VPN throughput	1 Gbit/s
Maximum firewall connections	200000
Maximum firewall connections per second	75000
Supported network protocols	SMTP
Console port	RJ-45
Connectivity technology	Wired
Number of console ports	1
SFP module slots quantity	4
Ethernet LAN (RJ-45) ports	8
SSD capacity	200 GB
Storage media type	SSD
Form factor	1U
Input current	2 A
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	100 W
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Country of origin	Mexico
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85176990
Package depth	1409.7 mm
Package width	990.6 mm
Package height	457.2 mm
Package weight	5782.31 g

Weight and Dimensions

Depth	436.9 mm
Width	268.7 mm
Height	43.7 mm