Cisco IR829 User Manual

CHAPTER
3-1
Cisco IR829 Integrated Services Router Hardware Installation Guide
3
Connecting the Router
This chapter describes how to connect Cisco IR829 Integrated Services Router (ISRs) to Ethernet
devices and a network. The chapter contains the following sections:
• Preparing to Connect the Router, page 3-1
• Connecting a PC, Server, or Workstation, page 3-2
• Connecting a Terminal or PC to the Console Port, page 3-3
• Connecting to DC Power, page 3-3
• Verifying Connections, page 3-6
Note For compliance and safety information, see the Regulatory Compliance and Safety Information
Roadmap that ships with the router and
Regulatory Compliance and Safety Information for Cisco 800
Series and SOHO Series Routers.
Preparing to Connect the Router
Before you connect the router to the devices, install the router according to the instructions in Chapter 2,
“Installing the Router”.
Preventing Damage to the Router
To prevent damage to your router, follow these guidelines when connecting devices to your router:
• Turn off power to the devices and to the router until all connections are completed.
Caution Do not turn on the devices until after you have completed all connections to the router.
• If you must supply your own cable, see the “Technical Specifications” section on page 6-1 for
cabling specifications. If this appendix does not provide specifications for a particular cable, we
strongly recommend ordering the cable from Cisco.

Cisco IR829 Specifications

General

Brand	Cisco
Model	IR829
Category	Network Router
Language	English