Linksys E-Series
Advanced Configuration.
Advanced Configuration.
2.
Enter the user name and password, then click OK The utility’s main menu
How to open the browser-based utility
opens.
To access some advanced settings, you need to open the browser-based utility.
To open the browser-based utility:
1.
Run Cisco Connect, click Change under Router settings, click Advanced
settings, then click OK
– or –
Open a web browser on a computer connected to your network, then go
to 192.168.1.1
The router prompts you for a user name and password.
TIPS
If you set up your router without using Cisco Connect, your router’s
default password is admin (You can leave the user name blank.).
If you used Cisco Connect to set up your router, you can see your
router’s user name and password by running Cisco Connect, then
clicking Router settings
4
4
To Next Page
Loading...
Need help?
General
