26
Chapter 6: Using the Media Navigator
Overview
Wireless-B Media Adapter
Chapter 6: Using the Media Navigator
Overview
This chapter explains how to use the Adapter via the Media Navigator. These are some sample tasks:
• Choose Music
• Play Music
• Choose Pictures
• Start a Slideshow
• Start a Slideshow with Music
After you have set up the Adapter and connected it to your TV and stereo, the main menu will appear (see Figure
6-1). It has three choices:
• Music
•Pictures
•Help
If you haven’t already done so, insert the included AAA batteries into the Remote Controller.
To navigate the menus of the Media Navigator, use the directional arrows on the remote. Press the Select button
to make a selection. Press the Menu button to access the main menu at any time.
Music Menus
At any time, you can use the Music button on the remote to access the Music menu.
When you select the Music menu, you see three choices: Choose Music, Now Playing, and Options. See Figure 6-2.
Figure 6-1: Main Menu Screen
Figure 6-2: Music Screen
Note: If your host computer goes into Sleep mode, then you will not be able to use the Adapter. To
prevent Sleep mode:
1. Click the Start button and Control Panel.
2. If your PC is using the Classic interface, double-click Power Options. If your PC is using the
default interface, click Performance and Maintenance and then Power Options.
3. On the Power Schemes screen, select Never for the System standby and System hibernate
settings.
4. Click the OK button.
To Next Page
Loading...
Need help?
General