Cisco MX200 Series User Manual

20
D1458217 User Guide Cisco TelePresence
Prole Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.
Point-to-point video calls
Receiving a call
•
If someone calls you may accept,
decline or ignore the call.
•
If you decline the call, busy
information will be sent to the
calling party.
•
If you ignore the call, the calling
party will perceive this as if you
were absent.
•
You may want to set your system
to respond automatically to an
incoming call (Auto Answer). This
is described in “Administrator
Settings—Call Details” on page
65. Observe that your Video
Support Team may have password
protected this area.
•
If you choose to activate Auto
Answer you may want to mute the
microphone to preserve privacy.
This must be set up manually every
time.
If you set up the system to respond to incoming calls
automatically (Auto Answer) you may want to mute the
system microphone(s), to preserve privacy.
Microphone(s) are muted if this symbol is illuminated in
red. To mute / unmute the microphone(s), tap the symbol.
If someone calls you

Cisco MX200 Series Specifications

General

Brand	Cisco
Model	MX200 Series
Category	Conference System
Language	English