Cisco MX200 Series User Manual

68
D1458217 User Guide Cisco TelePresence
Prole Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.
You may specify whether to use IPv4
or IPv6 and whether to use static IP
address or DHCP.
When set to Static, applicable
addresses must be set accordingly.
To change these from default values,
tap Advanced (not shown).
Caution! There is no Cancel
function letting you exit the menu
undoing any changes you have
made. Take care!
Managing the Settings
Administrator Settings—IP & VLAN
About IP Settings
To exit
Administrator
Settings, tap
Back.
To exit Settings
as such, tap
Exit.
Note that there
is no Cancel
function letting
you exit the
menu undoing
any changes you
have made.
Take care!

Cisco MX200 Series Specifications

General

Brand	Cisco
Model	MX200 Series
Category	Conference System
Language	English