8
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
Alternatively, tap the Search
or Dial eld, as outlined.
This will invoke the virtual
keyboard.
Tap Contacts, as
outlined.
To search for
someone in
a specic list
(Favorites,
Directory or
Recents), tap that list (a) and
then scroll down (b) to locate
the entry.
Key in the name,
number, or IP address.
Matches will appear as
you type.
There is an extended
numerical mode
available, which also
contains special
characters.
To toggle between the
alphanumerical mode
and the extended
numerical mode tap the key in the
lower left corner of the keyboard, as
outlined.
When you are
ready to place the
call, tap the green
Call button.
Place Call From Contact List
Place Call
Your lists of Contacts consist of
three parts:
Favorites. These contacts have
put there by you. These entries
will typically be someone you call
frequently or otherwise need to
access in a swift and convenient
manner from time to time.
Directory will typically be a corporate
directory installed on your system by
your video support team.
Recents is a list of calls you have
placed, received or missed earlier.
You may clear the Recents list for
privacy reasons, see “Call Recents”
on page 39.
The following options apply:
•
You may key in a name, number or
an IP address and the system will
look in all lists for you.
•
You may tap a tab and then scroll
through the list or key in a name or
number. Your search will then be
restricted to that specic list.
•
You may add the entry to the list of
Favorites; edit aspects of the entry
before calling; change the call
rate and remove the entry from
Recents.
About the Lists of
Contacts
To Next Page
Loading...
Need help?
General
