Cisco SFE2000P User Manual

CHAPTER
2-1
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-06
2
Introduction to the SCE Platform
This chapter provides an introduction to the SCE 2000 4xGBE Platform, the Service Control hardware
component.
• Information About The SCE Platform
Information About The SCE Platform
The Service Control Engine (SCE) platform, which is the hardware component of the Cisco Service
Control solution, is designed to support observation, analysis, and control of Internet/IP traffic. The
following table summarizes model information for the SCE 2000 platform
• Front Panel
• Back Panel
• Information About Checking the Shipping Container Contents
• SCE 2000 Installation Checklist
Front Panel
The SCE 2000 Front Panel consists of ports and LEDs as shown in the following figure and tables.
Table 2-1 SCE Platform Model Information
Model number SCE 2020 4xGBE
Link Type Gigabit Ethernet
Number of Ports 4
Number of Links 2

Cisco SFE2000P Specifications

General

Brand	Cisco
Model	SFE2000P
Category	Network Router
Language	English