EasyManuals Logo
Home>Cisco>Switch>SG 102-24

Cisco SG 102-24 User Manual

Cisco SG 102-24
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Cisco Unmanaged Rackmount Switches 7
Front Panel LEDs
System LED—Lights green when the switch is powered on.
Link/Act LED—(Green) Lights when a link between the corresponding port
and another device is detected. Flashes when the port is passing traffic.
100M LED (if present)—(Green) Lights and remains lit when another device
is connected to the port, is powered on, and a 100 Mbps link is established
between the devices. When the LED is off, the connection speed is under
100 Mbps or nothing is cabled to the port.
Gigabit LED (if present)—Lights and remains lit when another device is
connected to the port, is powered on, and a 1000 Mbps link is established
between the devices. When the LED is off, the connection speed is under
1000 Mbps or nothing is cabled to the port.
MiniGBIC (if present)—Lights green when a connection is made through
the shared RJ-45 port. It flashes green when the connection is active.
Back Panel
The power port is located on the back panel of the unmanaged rackmount
switch.
Side Panel
The Kensington lock is located on the side panel of the unmanaged
rackmount switch. (Only the Cisco SF 100-16, SF 100-24, SG 100-16, or
SG 102-24 Unmanaged Rackmount Switch has a lock.)
276580
POWER
276581

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SG 102-24 and is the answer not in the manual?

Cisco SG 102-24 Specifications

General IconGeneral
BrandCisco
ModelSG 102-24
CategorySwitch
LanguageEnglish

Related product manuals