44
Accessing Voicemail
To access voicemail, press the
Messages
button on your phone. Your system administrator should
configure your phone with the correct voicemail number so that pressing the
Messages
button
automatically dials your voicemail system.
If you need to change the number for your voicemail (for example, if your phone is not part of a Cisco
Voice System and you have external voicemail), perform the following steps:
STEP 1 Press the Setup button.
STEP 2 Scroll to Voice Mail and press select.
STEP 3 Enter the number to dial for voicemail. For a Cisco Voice System, this is normally vmm.
For an external system, enter the phone number, including any digits that must be dialed to reach
an outside line.
To clear the field of a previous entry, press
clear
. To enter letters, press the
Right
navigation button
to scroll, then press the
alpha
softkey.
STEP 4 Press save.
To Next Page
Loading...
Need help?
General
