62
Setting Voice User Parameters
The voice User parameters control the phone user options, such as caller ID and speed dial numbers.
The table identifies and describes the parameters in the User tab.
Cfwd Setting
Choose yes from the drop-down menu to enable call forwarding.
Choose no to disable the feature.
Cfwd All Dest
Enter the target phone number to where all calls are forwarded.
When this field is anything other than blank, the phone rings once
and the call is forwarded.
CFWD Busy Dest
Enter the target phone number to where all calls are forwarded
when this phone is busy.
CFWD No Ans
Dest
Enter the target phone number to where all calls are forwarded.
CFWD No Ans
Delay
Enter the number of seconds to delay before forwarding calls
because there is no answer at your phone.
Speed Dial
X
Enter the target a phone number, IP address, or URL that will be
called or launched when you press the speed dial number. You
can configure up to eight speed dials, one for each of the
numbered keys 2 through 9.
CW Setting
Choose yes from the drop-down menu to enable call waiting.
Choose no to disable the feature. Call waiting alerts you when
you are on a call by ringing the phone and displaying a status
message that you have an incoming call. If you turn call waiting
incoming calls do not ring your phone when you are on another
call, and the caller hears a busy signal or message.
To Next Page
Loading...
Need help?
General
