Cisco SPA122 Provisioning Guide

Router Configuration Parameters
<Software_DMZ> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 180
7
<QoS_Bandwidth_Control> Example: QoS always on,
maximum bandwidth of 20,000 kbps
<router-configuration>
...
<QoS_Bandwidth_Control>
<WAN>
<QoS_Always_ON>1</QoS_Always_ON>
<Upstream_Bandwidth>20000</Upstream_Bandwidth>
</WAN>
</QoS_Bandwidth_Control>
...
</router-configuration>
<Software_DMZ> Parameters
This section describes the parameters in the <SNMP> section of the config.xml
file.
NOTE In addition to the descriptions, also refer to <Software_DMZ> Example: DMZ
allowing Internet traffic to access 192.168.15.101, page 182.
<Rule1>
All parameters in the <Software_DMZ> section are nested between <Rule1> and
</Rule1>. Only one DMZ rule is allowed on this device.
<Upstream_Bandwidth> Description: The maximum available upstream bandwidth, in kbps,
as specified by the Internet Service Provider
User Interface: Network Setup > Application > QoS page,
Upstream Bandwidth field
Values: number
Default: 10000
Example:
<Upstream_Bandwidth>20000</Upstream_Bandwidth>
Parameter Details

Cisco SPA122 Specifications

General

Brand	Cisco
Model	SPA122
Category	Adapter
Language	English