1
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
Deployment and Provisioning
Cisco IP Telephony devicesSPA100 and SPA200 Series ATAs are intended for
high-volume deployments by VoIP service providers to residential and small
business customers. In business or enterprise environments, these ATAs can serve
as terminal nodes. These devices are widely distributed across the Internet,
connected through routers and firewalls at the customer premises.
The IP Telephony device can be used as a remote extension of the service
provider back-end equipment. Remote management and configuration ensures
the proper operation of the IP Telephony device at the customer premises.
This customized, ongoing configuration is supported by the following features:
• Reliable remote control of the endpoint
• Encryption of the communication controlling the endpoint
• Streamlined endpoint account binding
This chapter describes the features and functionality available when provisioning
these ATAs and explains the setup required:
• Deployment, page 7
• Provisioning Overview, page 9
To Next Page
Loading...
Need help?
General
