60
5. PRINTER CLEANING
If the interior of the printer is dusty, printing quality can be lowered.
In this case, follow the instructions below to clean the printer.
5.1 Print-Head Cleaning
(1) Use an applicator swab moistened with an isopropyl alcohol to
clean the print-head and remove any dust.
(2) Once cleaning is complete, allow the printer to dry then install the
stock and close the cover.
Print-Head
NOTE
1. Make sure to turn the printer power off prior to cleaning.
2. The print-head can become very hot during printing; allow the printer
approximately 10 minutes to cool before cleaning.
3. Do not touch the print-head, it can be damaged by static electricity.
4. Take care not to allow the print head to become scratched and/or
damaged in any way.
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
To Next Page
Loading...
Need help?
General
