116
INJECTION
SPECIFICATIONS : PRE-POSTHEATING CIRCUIT
Engine : 8HT
The pre-heating time varies as a function of the engine coolant temperature
The pre-postheating control unit is piloted by the engine ECU.
Pre-postheating control unit
Supplier/Reference :
NAGARES : 96 456 686 80.
CARTIER : 96 456 692 80.
Pre-heater plugs
"a" : Marking zone.
Supplier/Reference:
NGK : YE04.
BERU : 0 100 276 004.
Tightening torques (m.daN)
Plugs on cylinder head : tighten to : 0,85 ± 0,08 m.daN.
Bar on plugs : tighten to : 0,12 ± 0,03 m.daN.
B1H200YD
To Next Page
Loading...
Need help?
General
