172
BRAKES
B3F2010D
CHECKING THE BRAKE PEDAL
IMPERATIVE : Respect the safety and cleanliness requirements.
Height A of the brake pedal in relation to the floor (engine running) :
135,8 to 145,8 mm for left hand drive models
121,6 to 131,6 mm for right hand drive models
If the pedal height is not correct, adjust it.
Disconnect the connector of the stoplamps switch (1).
Unscrew the stoplamps switch (1).
Remove the stoplamps switch (1).
Slacken the push-rod locking nut (2).
Adjust the height relative to the floor A of the brake pedal by rotating the
push-rod (2).
Tighten the push-rod locking nut (2).
Tightening torque : 2,2 ± 0,2 m.daN.
To Next Page
Loading...
Need help?
General
