[SM-P00081-A]
―11―
2
CAUTION
2. CAUTION
● Be careful of the surroundings and ensure safety before turning on or off the power.
The system or solenoid valve (cylinder) may start operating suddenly.
● For the delay time, refer to the instruction manual for the master unit. Transmission delay in the
system varies depending on the PLC scan time and other devices connected to the same network.
● For the response time of the solenoid valve, check the solenoid valve specifications.
● Solenoid valve off time is delayed by approximately 20 msec due to the surge absorbing circuit
integrated in the slave unit.
● Wire the power cable and network cable properly within its specifications.
Incorrect wiring may cause the slave unit to malfunction or break.
● Do not apply tension or shocks to the power cable or network cable.
● Check that cables and plugs are securely connected before turning on the power.
● Do not disassemble, modify, or repair the product.
These may cause failure or malfunction.
● Do not drop or apply excessive vibrations or shocks to the product.
These may cause damage because parts inside the product are made to precise specifications.
● Do not attach or detach the plug while the power is turned on.
A failure or malfunction may occur.
● Mold or rust could form if the shipping environment reaches high temperatures.
Always place the product in a sealed package along with desiccant.
● Keep 200 mm or more away from high-voltage lines and power lines, or wire the high-voltage lines
and power lines in metal tubing and ground the metal tubing before mounting this slave unit.
To Next Page
Loading...
Need help?
General
