Basic Operations
•
B-BOOST:
b~
emphasized
(6
indicator lights
in
the display)
• IMPACT :
b~
and treble emphasized
(6"
indicator lights
in
the display)
• EXCITE : bass and treble emphasized mid
de-emphasized
((~)
indicator lights
in
the display)
Setting
the
Z-Enhancer
This unit is provided with 3 types of sound tone
effects stored
in
memory. Select the one you pre-
fer.
2-1. Press the [
.....
,
~]
button and select "Z-
EHCR".
3-1
.Turning the [ROTARY] knob to change to the
following sound tone effect.
Adjusting
the
balance
2-1. Press the [
.....
,
~
] button and select
"BALANCE".
3-1. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
The display changes as follows:
"RIGHT XX" will be displayed where "XX"
is
the value from 1 to 12.
"LEFT XX" will be displayed where "XX"
is
the value from 1 to 12.
Notes:
• When Balance is
0,
"CENTER" will be displayed
instead.
• The factory default setting is "CENTER".
Adjusting
the
treble
2-1. Press the [
.....
,
~]
button and select
"TREBLE".
3-1. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
"TREB XX" will be displayed where "XX"
is
the value from -7 to +7.
Note:
• The factory default setting is "TREB 0".
Adjusting
the
bass
2-1. Press the [
.....
,
~]
button and select
"BASS".
3-1. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
"BASS XX" will be displayed where "XX"
is
the value from
-7
to +7.
Note:
• The factory default setting is "BASS 0".
: no sound effect
"OFF"
t
"B-BOOST"
t
"IMPACT"
t
"EXCITE"
• OFF
3.
Turning the [ROTARY] knob to adjust the
selected Sound mode.
Z-EHCR
Selection type : OFF
~
B-BOOST
~
IMPACT
~
EXCITE
~
OFF
...
BASS
Adjustment
range:
-7 to +7
TREBLE
Adjustment
range:
-7 to +7
BALANCE:
Adjustment
range:
LEFT 12 to RIGHT 12
FADER
Adjustment
range:
FRONT 12 to REAR 12
Notes:
• If no operation is performed for more than 10 sec-
onds, the Audio mode is cancelled and returns to
the previous mode.
• Bass and Treble can only be adjusted when the
"Z-EHCR" is off.
Note:
• The factory default setting is "OFF".
10 DB175MP