Clarion DB175MP User Manual

•. (liEBI.1I (l1I ... lIiEIOIIIS , .
Adjustment Mode
1. Press and hold the [0] button for more than 1
second to switch to the adjustment selection
display.
2. Press the [~,~] button to select the "item
name".
"CLOCK" ~ "SCRN SVR" ~"SCROLL"
~ "AUX SENS" ~ "TEL-SP" ~
"TEL-SW"
* Some of the items will have om indicator
light on, the [
~ II ] button must be pressed to
display the setting value.
3. Turn the [ROTARY] knob to select the "desired
setting value".
* After completing settings, press the [0] button
to return to the Previous mode.
• Adjusting clock setting
2-1. Select "CLOCK".
3-1. Press the [
~ II] button
3-2. Press
[~ ,~] button to toggle HOUR
and MINUTE selection. the HOUR is selected
and blinking by default.
3-3. Turn the [ROTARY] knob clockwise to in-
creases hour/minute or counterclockwise
to
decrease hour/minute.
3-4. Press the
[~II] button to confirm the clock
setting. The display will show "MEMORY"
to indicate the setting has been stored and
return to "CLOCK".
Note:
- If you remove the vehicle's battery for a check or
repair, the clock will be reset, so
user must set it
again.
• Turning the screen saver function on or
off
This unit is provided with the screen saver func-
tion which allows you to show screen saver in the
operation status indication area of the display.
You can turn on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
* The factory default setting is "ON".
2-1. Select "SCRN SVR".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
-ON:
Screen saver is enabled.
-OFF:
Screen saver is disabled.
• Setting the method for title scroll
Set auto scroll function for MP3IWMA title.
* The factory default setting is "ON".
2-1. Select "SCROLL".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
-ON:
To scroll automatically.
-OFF:
To scroll just 1 time when the title was changed.
• Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
* The factory default setting is "MID".
2-1. Select "AUX SENS".
3-1. Turn the [ROTARY] knob to select "LOW",
"MID" or "HIGH".
Note:
- For telephone interrupt, AUX SENS is always
"MID".
• Setting the car speaker output for the
cellular phone
* The factory default setting is "RIGHT".
* To output the telephone calls, set the cellular phone
interrupt to ON.
2-1. Select "TEL-SP".
3-1. Turn the [ROTARY] knob to select "RIGHT"
or "LEFT".
-"RIGHT"
Telephone calls can
be heard on the front right
speaker connected to this unit.
-"LEFT"
Telephone calls can be heard on the front left
speaker connected to this unit.
DB175MP 19

Clarion DB175MP Specifications

General

Brand	Clarion
Model	DB175MP
Category	Car Receiver
Language	English