CLIVET CPAN-U-51 User Manual

pag 20
CLEAN
In the CLEAN mode, the unit is on the ejection mode with injection of all the external air for a fixed time; after this time, the
mode deactivates.
It can be activated from the thermostat, keyboard or remote selector (see ELECTRICAL CONNECTIONS section).
VENTILATION
When the unit is in ONLY VENTILATION mode, it operates like a fan; the fans are activated; no adjustment on the room
temperature.
It can be activated from the thermostat, keyboard or remote selector.
SET-POINT
MANUAL AMBIENT SET POINT
The room set point is defined by thermostat with parameter P01 ManSet = 23°C.
The set is modifiable MANUALLY, the modify is limited in values: 25°C > ManSet > 21°C
Starting from ManSet the module calculates the set point for HEATING and COLING, spacing them of 1°C respect the manual
set:
COOLING = 24°C
HEATING = 22°C
AUTOMATIC AMBIENT SET POINT
The set-point can also be adjusted AUTOMATICALLY to the external temperature variations: the variation curve is defined by
5 points, modifiable by service centers through the service keypad.
The curve can be raised or lowered through parameter P09 of the room thermostat.
The choice between MANUAL or AUTOMATIC setpoint is carried out by thermostat with parameter P02 OnSetMan.
1 manual operating
0 automatic operating
RELATIVE WINTER HUMIDITY SET POINT
Only if the optional humidifier is present.
The humidification action is not activated with the unit in the SUMMER mode or when the compressors are working in the
refrigeration mode.
The set point can also be modified by the thermostat with the parameter P05 SetUrHeat.
2°C = + P 09
2°C = - P 09
25 °C = ManSet MAX
21 °C = ManSet MIN
23 °C = ManSet
set 0
set 4
set 3
set 2
set 1
Text 0
Text 1
Text 2
Text 3
Text 4

CLIVET CPAN-U-51 Specifications

General

Brand	CLIVET
Model	CPAN-U-51
Category	Air Conditioner
Language	English