ComAp IS-NTC-BB User Manual

IS-NT-Async-SPI, SW Version 1.2, ©ComAp – February 2011
IS-NT-Async-SPI-1.2.PDF
83
The channels are divided into groups of 4. Each group has independent binary output, which activates if any
of the 4 channels within the group is active (1-4, 5-8,...). There is also one common output for all 16
channels.
Act. calls/SMS
HistRecOnly [ DISABLED / ENABLED ] (FV)
Enables or disables active calls/SMS/mails to selected phone, mobile or mail address when a History record
type “protection” occurs.
Force value possibility: Yes
Hint:
If enabled for an SMS type active call, an empty Alarmlist would be sent, as this type of protection does not
appear there. So together with the Alarmlist content, the prefix of the History record (“Hst” in english) is sent
to indicate the reason for the active call (available in future SW versions).
AlarmlistOnly [ DISABLED / ENABLED ] (FV)
Enables or disables active calls/SMS/mails to selected phone, mobile or mail address when an Alarm only
type protection occurs.
Force value possibility: Yes
Warning [ DISABLED / ENABLED ] (FV)
Enables or disables active calls/SMS/mails to selected phone, mobile or mail address when a Warning type
protection occurs.
Force value possibility: Yes
Off load [ DISABLED / ENABLED ] (FV)
Enables or disables active calls/SMS/mails to selected phone, mobile or mail address when an Off load type
protection occurs.
Force value possibility: Yes
Hint:
If enabled for an SMS type active call, an empty Alarmlist would be sent, as this type of protection does not
appear there. So together with the Alarmlist content, the prefix of the Off load protection (“OfL” in english) is
sent to indicate the reason for the active call (available in future SW versions).
BrkOpen&CoolDn [ DISABLED / ENABLED ] (FV)
Enables or disables active calls/SMS/mails to selected phone, mobile or mail address when a
BrkOpen&CoolDn type protection occurs.
Force value possibility: Yes
Mains protect [ DISABLED / ENABLED ] (FV)
Enables or disables active calls/SMS/mails to selected phone, mobile or mail address when a Mains protect
type protection occurs.
Force value possibility: Yes
Hint:
If enabled for an SMS type active call, an empty Alarmlist would be sent, as this type of protection does not
appear there. So together with the Alarmlist content, the prefix of the Mains protection (“MP” in english) is
sent to indicate the reason for the active call (available in future SW versions).
Slow stop [ DISABLED / ENABLED ] (FV)
Enables or disables active calls/SMS/mails to selected phone, mobile or mail address when a Slow stop type
protection occurs.
Force value possibility: Yes

ComAp IS-NTC-BB Specifications

General

Brand	ComAp
Model	IS-NTC-BB
Category	Controller
Language	English