Comau Robotics C5G User Manual

Setting out of work and dismantling
99
HS-RC-C5E-MAN_07.fm
00/0309
10.5 Removing the pile and battery from the
Control Unit
Status: – Power off
Material: – Not necessary
Equipment: – Blade screwdriver
– Star-shaped blade screwdriver
–Container
Preliminary procedures / notes
– The disposing activities shall be carried out in compliance with the laws in force
in the land where the machine is installed: dispose of batteries and piles
according to the environmental protection prescriptions and transfer them to the
suitable waste collecting sites
– The Control Unit features the following piles /batteries:
• Button-shaped pile in the module AMS-APC820 (reference A)
• Battery in the module C5G-UPS (reference B)
• Battery in the WiTP Programming terminal (reference C).
Operating procedure
Button-shaped pile in the module
AMS-APC820 (reference A)
a. Lift the front item of module
AMS-APC820.
b. Open the lower door.
c. Remove the button-shaped pile
pulling the tag.
A
B
C

Comau Robotics C5G Specifications

General

Brand	Comau Robotics
Model	C5G
Category	Control Unit
Language	English