Press the Power button for more than 5s at
power on status, the klipper system will closed.
Press the Power button for 1s at power off
status, it will power on.
Power:
After closing the klipper system, the printing will be stopped,even though you didn’t turn
off the machine's power.
Accelerometer
Type-C
DC 12~24V
USB2.0
USB2.0
USB3.0
Power
USB2.0X2
LAN
Touchscreen
09
Emergency stop
Macros
Home
Back
1. Nozzle, hot bed, Real-time temperature preview
2. Model|Current Menu
3. Time
4. Nozzle Temp：Click number to adjust nozzle temp
5. Hotbed Temp：Click number to adjust hotbed temp
6. Temperature curve：Click on the names of
"Extruder" and "Heater Bed" above to turn on and
off their temperature curves
7. Main menu：Please read the following introduction.
8. Bottom option
Main Menu
To Next Page
Loading...
Need help?
General