WELDmNG ROD SPECmF CATmONS
AWS E-7014 CONTACT AC-DC
for welding of mild steel
GENERAL APPLICATIONS: Sheet Metal Fabrication and Repairs e Machinery
Fabrication • Construction Equipment Repairs = Storage Tanks e Shipbuilding
Fabricating Structural Shapes and Heavy Equipment = Equipment and Heavy Pipe
Welding
Diameter .... 1/18" 3/16" 1/4"
Length 12" 18'" 18"
Amperes 70-90 200-250 250-350
SIZES AND HEATS lAMPS)
3/32" 1/8" 5/32"
14" 14" 14"
90-110 130-105 190-210
SPECl FICATIONS
MEETS _k
THESE _) AmericanWeldingSociety ..................... Class:E-7014
REQUIREMENTS JV American Bureauof Shipping ................ C/ass:E-7014
Physical Properties of Deposited Metal: AsWelded
TensileStrength ................................................................................... 72,000 psito 78,000 psi
Yield Point ..................................................................................... 60,000 psito 69,000 psi
% Elongation in 2.inches .......................................................................................... 17%to 28%
DESCRIPTION
The AWS E-7014 is an excellent electrode for the inexperienced or experienced welder_ Starts on contact
with smooth surge-free arc, also restrikes instantly. This Craftsman electrode has powdered iron in the
coating which makes welding easier and faster_ The slag is easy to remove in most casesself-peeling as the
weld cools_
Ideal for fixture welding where weld appearance and lack of spatter is important. The amount of slag
permits use in all welding positions
WELDING PROCEDURES: Weld materials should be clean. Best results are obtained when fit-up is good.
Either AC or DC current may be used. When arc is established, deposit metal holding a short arc or place
electrode in contact with work,.
2-4
To Next Page
Loading...
Need help?
General
