HOW TO USE YOUR PRESSURE
WASHER
washer, please call the pressure washer helpline at
1-800-222-3136.
Pressure Washer Location
Carbon Monoxide Poisoning
Risk of Fire Clearances
To Start Your Pressure Washer
To start your engine-powered pressure washer for the
information also applies whenever you start the engine
after you have let the pressure washer sit idle for at
least a day.
1.
Place pressure washer outside near an water source
at pressure washer end of garden hose.
2.
Check that high pressure hose is tightly connected to
spray gun and pump. See Assembly for illustrations.
3. Make sure unit is in a level position.
washer pump.
NOTICE DO NOT run the pump without the water
supply connected and turned on.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
squeeze the trigger to purge the pump system of air
and impurities.
6.
selector nozzle and release collar. Tug on selector
nozzle to make sure it is securely in place. See
How to Use Selector Nozzle.
8.
Push engine rocker switch (A) to ON (I) position.
11
OPERATION
A
WARNING POISONOUS GAS HAZARD. Engine
poisonous gas that could kill you in minutes.
You CANNOT smell it, see it, or taste it. Even
• Operate this product ONLY outside far away from
drawn towards occupied spaces.
according to the manufacturer’s instructions. Smoke
• DO NOT run this product inside homes, garages,
enclosed spaces even if using fans or opening doors and
• ALWAYS place this product downwind and point the
engine exhaust away from occupied spaces.
If you start to feel sick, dizzy, or weak while using this
WARNING
Exhaust heat/gases could ignite
pressure washer including overhead.
To Next Page
Loading...
Need help?
General
