7
with the recommended oil and fuel.
If you have any problems with the assembly of
your pressure washer, please call the pressure
washer helpline at 1-800-222-3136.
UNPACK THE PRESSURE WASHER
1. Remove everything from carton except pressure
washer.
3. Remove pressure washer from carton.
CARTON CONTENTS
Check all contents. If any parts are missing or
damaged, call the pressure washer helpline at
1-800-222-3136.
• Main Unit
• Handle
• Accessory Tray
•
• High Pressure Hose
• Spray Gun
• Nozzle Extension with Quick Connect Fitting
• Oil Pouch
• PerfectMix Siphoning Unit/Hose
• Quick Connect Selector Nozzle
• Quick Connect Kit
• Gun Holder Wireform
• Operator’s Manual
• Handle Bolts (2)
the pressure washer. Identify all contents with the
illustration on page 6. If any parts are missing or
damaged, call the pressure washer helpline at
1-800-222-3136.
ASSEMBLING PRESSURE WASHER
1. Attach handle and accessory tray.
2. Connect detergent siphon hose to pump.
3. Add oil to engine crankcase.
6. Connect water supply to pump.
7. Attach nozzle extension to spray gun.
8. Select/attach quick connect selector nozzle to
nozzle extension.
Attach Handle and Accessory Tray
1. Slide accessory tray (A) over handle supports (B)
connected to main unit.
2. Push the large tree clips (C) into the holes until
3. Place handle (D) onto handle supports connected
to main unit. Make sure holes in handle align with
holes on handle supports.
E) through holes from
F) from
NOTICE
fold the handle down while the engine is hot.
ASSEMBLY
E
D
F
C
B
A
To Next Page
Loading...
Need help?
General
