Creality Ender-3 V3 User Manual

6.Functional Specification
19
6.2 Auto extrude
② Click on “Extrude";
③ Waiting for the extruding process to complete.
① A.Unlock the DIP switch; B.Insert the filament into the deepest
part of the Teflon tube until it cannot be moved; C.Lock the DIP switch.
The current interface is for reference
only. Due to the continuous upgrading
of functions, it shall be subject to the
latest software/firmware UI published
on the official website.
B
C
A

Creality Ender-3 V3 Specifications

General

Brand	Creality
Model	Ender-3 V3
Category	3D Printers
Language	English