Crestron DM-TX-201-C User Manual

Crestron DM-TX-201-C DigitalMedia 8G+™ Transmitter 201
Installation
To prevent overheating, do not operate this product an area that exceeds the
environmental temperature range listed in the table of specifications.
The DM-TX-201-C mounts on a flat surface such as a wall or ceiling.
The DM-TX-201-C can also be mounted on a rack rail.
Mounting on a Flat Surface
To mount the DM-TX-201-C on a flat surface such as a wall or ceiling, use four
mounting screws (not included). The following illustration shows mounting of the
DM-TX-201-C on a wall.
Mounting DM-TX-201-C on a Wall
Mounting Screws (4)
(Not Included)
Operations & Installation Guide – DOC. 6958B DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C • 15

Crestron DM-TX-201-C Specifications

General

Type	Network transmitter
Duplex system	Full, Half
Auto-negotiation	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3at
RJ-45 ports quantity (transmitter)	2
Product color	Black
Output current	0.75 A
Output voltage	24 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	32 mm
Width	187 mm
Height	165 mm
Weight	721 g