Crestron DM-TX-201-C User Manual

Crestron DM-TX-201-C DigitalMedia 8G+™ Transmitter 201
Uploading and Upgrading
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
firmware) can be transferred to the device. In addition, the IP table of the device can
be configured.
Establishing Communication
Use Crestron Toolbox for communicating with the DM-TX-201-C; refer to the
Crestron Toolbox help file for details.
A PC running Crestron Toolbox communicates with the DM-TX-201-C in the
following ways:
• Via a DM switcher using TCP/IP or USB communication. TCP/IP provides
a faster method of communication than USB.
• Via the LAN port of the DM-TX-201-C using TCP/IP communication.
In this scenario, the DM-TX-201-C is used in a standalone configuration
(i.e, a DM switcher is not used).
Via DM Switcher
TCP/IP Communication via DM Switcher
DM 8G+
DM Switcher
PC Running
Crestron Toolbox
LAN
DM-TX-201-C
To establish TCP/IP communication between the PC and the DM-TX-201-C via the
DM switcher:
1. Establish communication between the PC and the DM switcher as described
in the latest version of the DigitalMedia Switchers Operations Guide
(Doc. 6755).
2. Use the Device Discovery Tool in Crestron Toolbox to find the IP address
of the DM-TX-201-C. The tool is available in Toolbox version 1.15.143 or
later.
3. Use the Address Book in Crestron Toolbox to create an entry for the
DM-TX-201-C using the TCP connection type, and enter the IP address of
the DM-TX-201-C.
4. Display the “System Info” window of the DM-TX-201-C (click the
icon); communications are confirmed when the device information
is displayed.
Operations & Installation Guide – DOC. 6958B DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C • 21

Crestron DM-TX-201-C Specifications

General

Type	Network transmitter
Duplex system	Full, Half
Auto-negotiation	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3at
RJ-45 ports quantity (transmitter)	2
Product color	Black
Output current	0.75 A
Output voltage	24 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	32 mm
Width	187 mm
Height	165 mm
Weight	721 g