Crestron DM-TX-201-C User Manual

Crestron DM-TX-201-C DigitalMedia 8G+™ Transmitter 201
d. Display the “System Info” window of the DM-TX-201-C (click the
icon); communications are confirmed when the device
information is displayed.
Firmware
Firmware files may be distributed from programmers to installers or from Crestron
to dealers. Firmware upgrades are available from the Crestron Web site as new
features are developed after product releases. For details on upgrading, refer to the
Crestron Toolbox help file.
Check the Crestron Web site to find the latest firmware. (New users may be required
to register to obtain access to certain areas of the site, including the FTP site.)
To upgrade DM-TX-201-C firmware:
1. Do either of the following:
• If the DM-TX-201-C is connected to a DM switcher, use the
Device Discovery Tool in Crestron Toolbox to find the IP address
of the switcher.
• If the DM-TX-201-C is being used in a standalone configuration
(not used with a DM switcher), use the Device Discovery Tool to
find the IP address of the DM-TX-201-C.
2. Add the IP address found in step 1 to the Address Book in Toolbox.
3. Download the appropriate .puf file from the Crestron Web site to your PC.
4 Double-click the .puf file. The Toolbox Address Book opens.
5. From the list in the Address Book, select the DM switcher (if the
DM-TX-201-C is connected to a switcher) or the DM-TX-201-C (if the
DM-TX-201-C is used in a standalone configuration), and then click OK.
Either of the following occurs:
• If the DM switcher was selected, a DM device list is displayed that
allows you to upgrade all DM devices connected to the switcher.
• If the DM-TX-201 was selected, a DM device list is displayed that
allows you to upgrade the DM-TX-201-C only.
In the DM device lists that are displayed, the checkbox of any item that
needs to be upgraded is automatically selected.
6. Click Update.
7. After the process is complete, click Recheck to verify the upgrade.
Operations & Installation Guide – DOC. 6958B DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C • 23

Crestron DM-TX-201-C Specifications

General

Type	Network transmitter
Duplex system	Full, Half
Auto-negotiation	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3at
RJ-45 ports quantity (transmitter)	2
Product color	Black
Output current	0.75 A
Output voltage	24 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	32 mm
Width	187 mm
Height	165 mm
Weight	721 g