Crestron DM-TX-201-C User Manual

DigitalMedia 8G+™ Transmitter 201 Crestron DM-TX-201-C
DM-TX-201-C Troubleshooting (Continued)
TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION
LAN network cable is
not connected to the
LAN port or to the
10BASE-T/100BASE-TX
compatible device.
Verify LAN network cable
connection to the LAN port
and to the compatible
network device.
LAN network cable is
not the proper type.
Verify that network cable
complies with EIA/TIA 568
and the CAT5 specification.
LAN network cable is
not the proper length.
Verify that network cable is
the proper length. Cable
length must not exceed
328 feet (100 meters).
LAN LED does
not illuminate
green.
10BASE-T/100BASE-TX
compatible device is not
receiving power.
Apply power to the network
device.
Loss of
functionality due
to electrostatic
discharge.
Improper grounding.
Check that all ground
connections have been made
properly.
Reference Documents
The latest version of all documents mentioned within the guide can be obtained from
the Crestron Web site.
List of Related Reference Documents
DOCUMENT TITLE
Crestron DigitalMedia Design Guide (www.crestron.com/dmresources)
Crestron DigitalMedia Infrastructure Guide
(www.crestron.com/dmresources)
Crestron DigitalMedia Switchers Operations Guide
(
www.crestron.com/manuals)
Crestron e-Control Reference Guide (www.crestron.com/manuals)
Crestron IP Considerations Guide for the IT Professional
(
www.crestron.com/dmresources)
Further Inquiries
If you cannot locate specific information or have questions after reviewing this
guide, please take advantage of Crestron's award winning customer service team by
calling Crestron at 1-888-CRESTRON [1-888-273-7876]. For assistance in your
region, please refer to the Crestron Web site (www.crestron.com) for a listing of
Crestron worldwide offices.
You can also log onto the online help section of the Crestron Web site
(
www.crestron.com/onlinehelp) to ask questions about Crestron products. First-time
users will need to establish a user account to fully benefit from all available features.
26 • DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C Operations & Installation Guide – DOC. 6958B

Crestron DM-TX-201-C Specifications

General

Type	Network transmitter
Duplex system	Full, Half
Auto-negotiation	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3at
RJ-45 ports quantity (transmitter)	2
Product color	Black
Output current	0.75 A
Output voltage	24 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	32 mm
Width	187 mm
Height	165 mm
Weight	721 g