Crestron DM-TX-201-C User Manual

DigitalMedia 8G+™ Transmitter 201 Crestron DM-TX-201-C
IP Configuration
If the DM-TX-201-C is used in a standalone configuration (i.e., not connected to a
DM switcher), use Crestron Toolbox to create the IP table entry of the
DM-TX-201-C.
NOTE: If the DM-TX-201-C is connected to a DM switcher, the IP table entry of
the DM-TX-201-C is created automatically.
1. Use the Device Discovery Tool to find the IP address of the DM-TX-201-C.
Then, in the Toolbox, display the “System Info” window (click the
icon) and select the DM-TX-201-C entry from the Address Book.
2. Select Functions | IP Table Setup.
3. Add, modify or delete entries in the IP table. The DM-TX-201-C can have
only one IP table entry.
4. A defined IP table can be saved to a file or sent to the device.
DMTool
In the Crestron Toolbox Address Book, select the DM-TX-201-C. Then use the
DMTool to configure EDID, HDCP or to troubleshoot AV on the DM-TX-201-C.
Refer to the help file for additional information.
DMTool
DMTool
24 • DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C Operations & Installation Guide – DOC. 6958B

Crestron DM-TX-201-C Specifications

General

Type	Network transmitter
Duplex system	Full, Half
Auto-negotiation	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3at
RJ-45 ports quantity (transmitter)	2
Product color	Black
Output current	0.75 A
Output voltage	24 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	32 mm
Width	187 mm
Height	165 mm
Weight	721 g