Cwejman S1 MK2 User Manual

14
Audio mixer for oscillator 1, 2, 3, ring modulator and pre-patched multi mode filters output.
The output signals of the three oscillators, the ring modulator and the output signal of the multimode filter has
individual levels into the lowpass filter input. The red labelling indicates the saturation level of the filter's input
stage when one source is used. Using more than one signal source, leads to earlier saturation.
The output signals of the three oscillators, the ring modulator and pre-patched white noise has individual
levels into the multi-mode filter input. The thick scale indicates the clip level of the filter's input stage when
one source is used (with higf Q-PEAK setting). Using more than one signal source, leads to earlier clip.
Low Pass Filter Audio Mixer
Multi Mode Audio Mixer
MULTI-MODEFILTER AUDIO MIXER
OSCILLATOR 1, 2, 3, RING MODULATOR
and WHITE NOISE (pre-patched)
LOWPASS FILTER AUDIO MIXER
OSCILLATOR 1, 2, 3, RING MODULATOR
and MULTI-MODE FILTER (pre-patched)

Cwejman S1 MK2 Specifications

General

Brand	Cwejman
Model	S1 MK2
Category	Synthesizer
Language	English