Before Using this Synthesizer
Checking Accessories
Upon receipt of this instrument, run the checks shown below:
Run visual checks against any and all damages or imperfections.
Check the quantity and rating of standard accessories to assure their conformance with
the table below.
Should there be any flaw, or damage, or missing or insufficient materials,
contact the dealer or the sales and support office.
Power cable
1
Interconnection cables, 3.5mm
6
Rack holders
2
Rack Holder screws, M5
4
The Instruction manual
1
Environmental Conditions
Do not expose this unit to direct sunlight, corrosive gas, dust or vibration. The ambient temperature
must be +15 to +30
°
C and the relative humidity must not be greater than 85%. The storage
temperature of this unit is 0 to +50
°
C.
This unit is designed with the affect of AC power supply line noise taken into consideration. However,
it is recommended that it be used in a place where there is minimum noise. If noise is unavoidable,
use a noise suppresser or the equivalent.
CAUTION! Before turning this unit on, check the supply voltage switch on the Rear Panel
for proper position.
Voltage selector in 115Vac position.
2
115
To Next Page
Loading...
Need help?
General