12D-Link DAP-2682 User Manual
Section 3 - Conguration
Channel:
Channel Width:
Authentication:
To change the channel, rst toggle the Auto Channel Selection setting to Disable, and then use the drop-down menu to make
the desired selection.
Note: The wireless adapters will automatically scan and match the wireless settings.
Allows you to select the channel width you would like to operate in 2.4GHz and 5GHz. Use the drop-down menu to choose 20
MHz or Auto 20/40 MHz or Auto 20/40/80 MHz.
Use the drop-down menu to choose Open System, Enhanced Open, Enhanced Open or Open, WPA-Personal, WPA-
Enterprise, or 802.1x.
• Select Open System, Enhanced Open, Enhanced Open or Open, to communicate the key across the network (WEP).
• Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
• Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server.
• Select 802.1X if your network is using port-based Network Access Control.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
