D-Link DAP-2682 User Manual

63D-Link DAP-2682 User Manual
Section 3 - Conguration
Quality of Service (QoS) enhances the experience of using a network by prioritizing the trac of dierent applications. The DAP-2682 supports
four priority levels. Once the desired QoS settings are nished, click the Save button to let your changes take eect.
Enable QoS:
Downlink Bandwidth:
Uplink Bandwidth:
ACK/DHCP/ICMP/DNS
Priority:
Web Trac Priority:
FTP Trac Priority:
User Dened-1/2/3/4
Priority:
Other Trac Priority:
Save:
Check this box to allow QoS to prioritize trac. Use the
drop-down menus to select the four levels of priority.
Click the Save button when you are nished.
The downlink bandwidth in Mbits per second. This value
is entered in the Uplink/Downlink Setting window.
The uplink bandwidth in Mbits per second. This value is
entered in the Uplink/Downlink Setting window.
Click the drop-down menu to select the level of
priority for the selected rule.
Click the drop-down menu to select the level of
priority for the selected rule.
Click the drop-down menu to select the level of
priority for the selected rule.
Click the drop-down menu to select the level of
priority for the selected rule.
Click the drop-down menu to select the level of
priority for the selected rule.
Click to save the updated conguration. To make the
updates permanent, click Conguration > Save and
Activate.
QoS

D-Link DAP-2682 Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Frequency band	2.4 - 5 GHz
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u
Virtual LAN features	Multiple VXLAN (MUX VLAN)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mean time between failures (MTBF)	341897 h
Maximum data transfer rate (5 GHz)	1700 Mbit/s
Maximum data transfer rate (2.4 GHz)	600 Mbit/s
Security algorithms	64-bit WEP, 128-bit WEP, WPA2
Number of SSID supported	16
Service Set Identifier (SSID) features	SSID broadcast
USB 2.0 ports quantity	-
Ethernet LAN (RJ-45) ports	2
Input current	2.5 A
AC input voltage	12 V
Power consumption (max)	15.5 W
Placement	Ceiling, Wall
Certification	FCC, CE, UL
Product color	White
LED indicators	Power, Status
Antenna type	Internal
Antenna gain level (max)	4.8 dBi
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	190 mm
Height	43.7 mm
Weight	551.6 g