D-Link DAP-2682 User Manual

33D-Link DAP-2682 User Manual
Section 3 - Conguration
The PVID Setting tab is used to enable/disable the Port VLAN Identier Auto Assign Status as well as to congure various types of PVID settings.
Click the Save button to let your changes take eect.
VLAN Status:
VLAN Mode:
PVID Auto Assign Status:
Use the radio button to toggle between
Enable and Disable.
Displays the current VLAN mode.
Use the radio button to toggle PVID auto
assign status to Enable.
PVID Settings

D-Link DAP-2682 Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Frequency band	2.4 - 5 GHz
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u
Virtual LAN features	Multiple VXLAN (MUX VLAN)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mean time between failures (MTBF)	341897 h
Maximum data transfer rate (5 GHz)	1700 Mbit/s
Maximum data transfer rate (2.4 GHz)	600 Mbit/s
Security algorithms	64-bit WEP, 128-bit WEP, WPA2
Number of SSID supported	16
Service Set Identifier (SSID) features	SSID broadcast
USB 2.0 ports quantity	-
Ethernet LAN (RJ-45) ports	2
Input current	2.5 A
AC input voltage	12 V
Power consumption (max)	15.5 W
Placement	Ceiling, Wall
Certification	FCC, CE, UL
Product color	White
LED indicators	Power, Status
Antenna type	Internal
Antenna gain level (max)	4.8 dBi
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	190 mm
Height	43.7 mm
Weight	551.6 g