33
DCS-6620 User’s Manual
D-Link Systems, Inc.
Using and Configuring the DCS-6620 with a Router
Viewing Your Camera
After all settings have been entered correctly, a PC user inside or outside your network will
have access to the camera through the Internet Explorer Web browser. To access the camera
from the Internet, type the IP Address of the router given to you by your ISP, followed by a
colon, and the port number that you gave your camera (e.g., http://205.163.122.96:83). It is not
necessary to enter the colon and port number if you are using the default Web server port 80.
To access from a computer on your local (home) network, simply enter the local IP Address
of the Camera followed by a colon and the port number (e.g., http://192.168.0.120:83).
Viewing the DCS-6620 Remotely
To Next Page
Loading...
Need help?
General