41
DCS-6620 User’s Manual
D-Link Systems, Inc.
Using the DCS-6620 with an Internet Browser
Configuration > Advanced > Network (continued)
Granted user name on the backup FTP server.
Granted password on the backup FTP server.
Granted folder on the backup FTP server.
Passive mode setting for the backup FTP server.
2nd FTP passive
Mode:
2nd FTP user name:
2nd FTP password:
2nd FTP remote folder:
Click Apply to make
changes effective
Invalid settings may cause the DCS-6620 to not respond. Change the configuration settings
only if necessary. Consult with your network administrator or your Internet Service Provider
(ISP) if you do not have the necessary information. If you cannot connect to the camera,
refer to page 130 for camera reset and restore factory settings procedures.
Can be set to other than the default port 80. When the
administrator changes the HTTP port of the DCS-6620 (which
has an IP address of 192.168.0.120) from 80 to 8080, users
must type http://192.168.0.100:8080 in the Web browser bar.
HTTP Port:
HTTP Settings
Streaming Settings
Can be set to other than the default port 5002 to correspond
with the port opened by the firewall.
Can be set to other than the default port 5003 to correspond
with the port opened by the firewall
UDP Audio channel
port:
UDP Video channel
port:
To Next Page
Loading...
Need help?
General