8
DCS-6620 User’s Manual
D-Link Systems, Inc.
Connections
Included with the DCS-6620 is an infrared remote control. You have the option of controlling the
camera via the Pan/Tilt/Zoom Controls using the IP surveillance software, Internet Explorer,
or via the infrared remote. To use the remote, make sure that IR Control is enabled on the
Camera Control page in the Configuration Menu under Advanced. Please refer to the section titled
“Using the DCS-6620 with an Internet Browser” in this manual for more information.
Infrared Remote Control
Stop
Auto-Patrol
Auto-Pan
Center
Home
Arrows
Arrows:
Use the Up, Down, Left and Right arrows to tilt/navigate the camera lens.
Home:
Returns the camera lens to the set home position.
Auto-Patrol:
Enables the Auto-Patrol function.
Auto-Pan:
Center:
Centers the camera lens.
Pans the camera one full cycle.
Stop:
Stops the movement of the camera during pan.
Zoom Out
Zoom In
Zoom In:
Zoom Out:
Zooms in to display a specific area.
Zooms out to display a larger area.
To Next Page
Loading...
Need help?
General