D-Link DES-1008D User Manual

10/100 Dual-Speed Switch User’s Guide
About This Guide
ix
0 A
BOUT
T
HIS
G
UIDE
Congratulations on your purchase of the 10/100 Dual-speed Switch.
This device integrates 100Mbps Fast Ethernet and 10Mbps
Ethernet network capabilities in a highly flexible desktop package.
Purpose
This manual provides detailed specifications and discusses how to
install your DES-1008D Dual-speed Switch.
Conventions
For simplicity, the term ‘switch’ refers to all Dual-speed, Ethernet
or Fast Ethernet switches, including the DES-1008D. The model
number is used only to explain features specific to the DES-1008D
switch.
Overview of this User’s Guide
♦ Chapter 1, Introduction. Describes the switch and its
features.
♦ Chapter 2, Unpacking and Setup. Helps you get started with
the basic installation of the switch.

D-Link DES-1008D Specifications

General

Switch type	Unmanaged
Switch layer	-
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Fast Ethernet (10/100)
Basic switching RJ-45 Ethernet ports quantity	8
10G support	No
Full duplex	Yes
Networking standards	IEEE 802.3, IEEE 802.3x
Copper ethernet cabling technology	100BASE-TX, 10BASE-T
MAC address table	1024 entries
Product color	Black
Maximum data transfer rate	100 Mbit/s
Mean time between failures (MTBF)	116186 h
Input current	1 A
Output voltage	5 V
Package depth	158 mm
Package width	104 mm
Package height	94 mm
Package weight	310 g
Pallet width	1200 mm
Pallet length	1100 mm
Pallet height (air)	1885 mm
Pallet gross weight (air)	330500 g
Quantity per pallet (air)	1000 pc(s)
Shipping (inner) case width	211 mm
Shipping (inner) case height	350 mm
Shipping (inner) case length	543 mm
Shipping (inner) case weight	6230 g
Shipping (inner) case net weight	3960 g
Number of cartons per pallet (air)	50 pc(s)
Quantity per shipping (inner) case	20 pc(s)
Harmonized System (HS) code	85176990