8
UNPACKING AND SETUP
Unpacking
Open the shipping cartons of the DES-1016D and carefully unpack its
contents. The carton should contain the following items:
One DES-1016D 16-port 10/100Mbps Fast Ethernet
Switch
One AC power cord
Four rubber feet to be used for shock cushioning
Screws and two mounting brackets
Quick Installation Guide
CD with documentation
If any item is found missing or damaged, please contact your local reseller
for replacement.
Setup
The setup of the DES-1016D can be performed by using the following steps:
The surface must support at least 11 lbs (5 kg).
The power outlet should be within 6 feet (1.42 meters)
of the device.
Visually inspect the power cord and see that it is
secured fully to the AC power outlet.
Make sure that there is adequate ventilation around
the Switch.
Do not place heavy objects on the Switch.
To Next Page
Loading...
Need help?
General
