D-Link DIR-412 User Manual

24D-Link DIR-412 User Manual
Section 3 - Conguration
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Enter the Primary and Secondary DNS server IP
addresses assigned by your ISP.
Maximum Transmission Unit - You may need to
change the MTU for optimal performance with
your specic ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet port’s
physical interface MAC address on the Broadband
Router. It is not recommended that you change the
default MAC address unless required by your ISP.
You can use the Clone Your PC’s MAC Address
button to replace the Internet port’s MAC address
with the MAC address of your Ethernet card.
IP Address:
Subnet Mask:
Default Gateway:
DNS Servers:
MTU:
MAC Address:
Choose Static IP (DHCP) from the My Internet Connection is drop-down menu if all the Internet port’s IP information is
provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es)
provided to you by your ISP. Each IP address entered in the elds must be in the appropriate IP form, which are four octets
separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
Manual Conguration (WAN Mode)Manual Conguration (WAN Mode)
Static IP Address

D-Link DIR-412 Specifications

Operating Environment

operating temperature	0˚ to 40˚C (32˚ to 104˚F)
operating humidity	10%-95% (Non-condensing)

Power

power supply	DC 5V/2.5A +/- 5%

Weight and Dimensions

dimensions	122 x 97 x 27 mm